Flange Gasket Kits,Gioăng phớt
Đang nạp trang. Vui lòng đợi giây lát!
loading ...

Đăng ký nhận tin định kỳ

Home Thiết bị ngành lọc hóa dầu Gioăng phớt

Flange Gasket Kits

Mã sản phẩm: Flange Gasket Kits

Thông tin chung

Insulation Gasket kits

Flange insulation kits are the most widely used form of controllinglosses due to corrosion. They can be used to control stray electric currents in the piping at oil, gas, water, refinery, and chemcial plants, to increase the effectiveness of cathodic protection systems and confine or eliminate electrolytic corrosion.


Each insulation gasket kits is packaged individually in durable corrugated box.

Tình trạng: Còn hàng     - Bảo hành:

Flange Isolation Gasket Kits

Flange Isolation Kits (or FIK as they are sometimes known) are designed to maintain the integrity and reliability of a piping system. Available for all flange sizes, types, pressure rating and materials, the kits provide an effective seal and electrically isolate each flange. By eliminating metal-to-metal contact, static current is halted to prevent corrosion and aid in the cathodic protection of the pipe.

 

Flange Gasket Kits Constitute

 

 

Gasket Types

Type E
Type E is a full-faced gasket with the same outside diameter as the flange and precision cut bolt holes. This design facilitates proper alignment of the gasket during installation. Type E gaskets are available in plain face or Neoprene face phenolic, as well as a variety of high temperature materials.
Type F
Type F gaskets are made to fit the raised face portion of the flange only. As there are no bolt holes in the F gasket, the outside diameter of the gasket fall within the inside diameter of the bolt hole circle. Available in the same materials as the type E gasket.
Type D
Type D gaskets are specifically designed to fit into the ring groove of ring-type-joint flanges. They are manufactured of a medium weave, fabric-reinforced phenolic material and are sized to ANSI and API specifications. Type D gaskets are available in basic oval as well as octagonal shape. Also available are BX gaskets with pressure ratings to 15,000 PSI.


Flange Isolation Kits are also utilised to isolate the mating surfaces of two dissimilar joining flanges (e.g. 316 SS to a Carbon Steel flange on a tank). This is mainly for the prevention of galvanic corrosion. The use of FIKs in such situations eliminates the electrochemical reaction which takes place when dissimilar metal flanges come into contact with the process fluid.

AG offers our Flange Isolation Kits in a range of different combinations to suit various flange types, pressure ratings and operating conditions. The information below provides an overview of available types with more information on each, or assistance in selecting the best combination of options for your application, available from your local AG branch.

Standard Kit Options

Single Washer Flange Isolation Kit

A single washer flange isolation kit is made up of a single isolating and sealing gasket to suit the flange size specified (Full Face is the usual option though ring face gaskets are also available) along with Insulating Bolt Sleeves (1 per bolt) and both insulating and steel washers (1 of each per bolt). Materials for each can be varied to suit individual application conditions.

Double Washer Flange Isolation Kit

A double washer FIK is made up of a sealing and isolating gasket to suit the flange size specified (again, full face and ring are available) as well as Insulating Bolt Sleeves (1 per bolt) and both insulating and steel washers (2 of each per bolt). Materials for each component can be varied to match application requirements.

One Piece Sleeve and Washer Flange Isolation Kit

Our one-piece sleeve and washer kits are made up of a sealing and isolating gasket, steel washers (two per bolt) and a one piece bolt sleeve and isolating washer (1 per bolt, manufactured to suit the dimensional requirements of the bolts used). These kits are easy to install and can have the materials for each individual component adjusted to match applications requirements.

Available Material Options

Isolating and Sealing Gaskets

The gaskets supplied with AG’s FIKs can be manufactured out of a wide range of materials to match the needs of a range of applications. Each of these are available in either full face (designed to fit to the outside of the flange with holes for the bolts) or ring face (sit inside the bolts whilst extending to the ID of the flange) styles. The most common materials are listed below:

  • Rubber Faced Phenolic Gaskets
  • PTFE Gaskets
  • Phenolic Fabric Reinforced Laminate Gaskets
  • Epoxy Glass Gaskets
  • GasketSeal® Sealing Gaskets (Consists of two moulded semi “O” rings mounted in grooves on opposite sides of an isolating retainer. These gaskets are self energising and allow the a seal to be created with low bolt loads)
  • LineBacker® Sealing Gaskets (A high quality gasket made from with a rectangular rubber sealing element placed on both sides of the gasket. Allows low pressure sealing).

Isolating Bolt Sleeves

  • Polyester Film
  • Polyethylene
  • Phenolic
  • Nomex® (by DuPont)
  • G7 Silicone Glass
  • G10 Epoxy Glass
  • Isoval 11 Epoxy Glass

Isolating Washers
(3mm thick as standard, other thicknesses available upon request).

  • Glass Clad Phenolic
  • G7 Silicone Glass
  • G10 Epoxy Glass
  • Isoval 11 Epoxy Glass

One Piece Sleeves and Washers

One piece sleeve and washers are typically moulded from acetal resin which limits them to operating in environments where they are not expected to see prolonged exposure to temperatures above 80ºC. To compensate for this, AG is also able to machine custom one piece sleeve and washers for more demanding applications from our range of electrical insulation tubes. For more information on this option, please contact your local AG branch.

 

Bạn có thể Download catalogue bộ gioăng bích tại đây
Download Flange Gasket Kits Catalogue here

 

 

 

 

THỐNG KÊ

Lượt truy cập: 8,890,844
Số người online: 807
Copyright 2013 By NKGroup